|
|
|
 |
TABNR#
/ TABW4
SOLID TOP TABLES
14" wide, 3/16” steel top surface
with 3” side overhangs; can be used
for infeed or outfeed tables. Also available
in 28" wide, 6' long (TABW4).
|
|
 |
TABR#
/ TABW4R
ROLLER TOP TABLES
14" wide, 3/16” steel top surface
with rollers on 12” centers; can be
used for infeed or outfeed tables. Also available
in 28" wide, 6' long (TABW4R).
|
|
|
LSU
LEDGE STAND
6" wide, 3/16" steel top surface;
easy for operator to grab parts after
cuts are made.
|
|
|
BF
/ BFE
BACK FENCE
144” long, steel, V-shaped fence; mounts
to the table opposite your TigerStop to assist
in material handling. Back Fence Extender
(BFE) extends the back fence to cover the
saw plate.
|
|
 |
BRLR-BRRL
BACK RULE
Attached to the back fence/extender for use
during the Set Point Optimizing operations
(Left or Right).
|
|
|
TABTILT
TILT BRACKET SET
Tilts table to cradle material against the
stop so that when pushing material to the
saw, material does not move away from the
fence/stop. Order one set per leg assembly.
|
|
| |
BR3X3
ATTACHMENT BRACKET
Pre-drilled, steel, L-shaped bracket used
to secure TigerStop’s beam to your table’s
back edge. (not required with TigerStop tables)
|
|
|
TABLEG
EXTRA LEG SETS
Used in creating a free standing table or
an extra leg for center support.
|
|
| |
SS20
/ SS24
SAW SUPPORT
20" or 24” wide, 18” deep
pre-drilled steel plates support equipment
between two TS tables. (2-TABLEG required)
|
|
 |
CR
PLASTIC ROLLERS
Wide plastic coated rollers can be used in
place of the regular steel roller inserts
in the roller tables.
|
 |
| |
|
| |
CS/CSR
CONTROL STAND
Used for mounting the controler
for easier reading of the screen or for
holding the printer when attaching labels.
|
|
LF
LINE FILTER
Protects your TigerStop from damage due
to electrical noise present in most shops.
|
|
SIK
STANDARD INTERLOCK KIT
Semi-automates your equipment and TigerStop
through integration with the machine's pneumatics.
|
|
AIK
ADVANCED INTERLOCK KIT
Fully automates your process by sensing
the saw's cycling and TigerStop's positioning
in push mode setup.
|
 |
CNVSYS-L
RETURN CONVEYOR SYSTEM
Do more with one operator. Processed
material drops down the slide table onto
the material return conveyor and returns
to the operator for easy offloading and
sorting.
|
 |
TS-CLAMPS
CLAMPS
Durable and versatile horizontal clamping
system for many TigerStop positioning applications.
Clamps must be installed in conjunction
with an AIK and the accompanying XIO upgrade.
TigerStop positions, clamps and cycles the
tool in one automated process.
|
|
PF / PFX
PUSHER FOOT
Attached to the flipaway stop, this 4”
wide, molded PVC accessory extends the range
by 10” to 14". Extended Pusher
Foot (PFX) extends the range by 13"
to 33".
|
|
|
MG / MGX
MITRE GAUGE
Attached to the flipaway stop, this molded
PVC 45- degree angled accessory extends
the range by 10”. Extended Mitre Gauge
(MGX) extends the range by 13" to 33".
|
|
|
GSX
GANG STOP
Attached to the flipaway stop, this L-shaped,
10 3/4” wide accessory is used when
multiple pieces are being processed. GSX
has a shock absorbing spring that protects
the machine against sudden impact and will
extend the belt life, while helping to maintain
accuracy.
|
|
|
PM
PUSHER MITRE
Used with the double mitre saws to push
material in a front fence setup.
|
|
|
SB
SPRING BUFFER
Attached to the flipaway stop, absorbs the
shocks that are generated during heavy material
processing.
|
|
| |
|
|
SET
LEVEL 2 UPGRADE
TIGERSET LEVEL 2
Permits operation of the TigerStop from a
remote location with your software and your
PC.
|
|
|
OPT
LEVEL 3 UPGRADE
TIGER OPTIMIZER AND TIGERLINK
Upgrade to basic software that adds cut list
download capabilities and the high-powered
optimization program.
|
|
PRINT
2 / PRINT 4
LEVEL 4 UPGRADE
2" OR 4" WIDE LABEL PRINTER
Immediately prints labels for each part with
user--determined fields.
|
|
|
BCSP
INDUSTRIAL BARCODE SCANNER
Industrial barcode scanner allows you to
input barcoded dimensions into TigerStop.
|
|
|
SX
SERIAL EXTENDER
Ensures uninterrupted communications between
your computer and the TigerStop through RS232
port.
Easy to install with customer provided ethernet cable.
(required if farther than 75 ft. apart)
|
|
|
USBA
USB TO RS232 ADAPTER
USBA uses a USB port to download
cut lists from your computer to your TigerStop
controler.
|
|
 |
TM
TIGERMEASURE
A photoelectric sensor measures your stock
length so you don't have to. The stock length
is automatically sent to the TigerStop for
push-feed operation. Best for use with random
length defect-free material.
|
|
TG
TIGERGAUGE
Make perfect inset molding pieces at the touch
of a button. TigerGauge integrates a ProPanel
RF, an electronic measuring device from Accurate
Technology Inc., with a TigerStop. The measurements
from the ProPanel are sent directly to the
TigerStop for fast and accurate processing.
ProPanel sold separately through Accurate
Technology Inc.
|
|
TDE
DOUBLE ENDED TIGERSTOP
Upgraded controller option that allows swapping
of the zero end point (permitting one TS to
service two machines). Pusher Foot sold separately.
|
|
| |
